Jenn-Air JMC2427IM Fiche Technique page 17

Component Serviceable Side
Monitor Top
Fuse
MW Light Top
Transformer
Line Fuse Top
Procedure
1.
Unplug microwave oven or disconnect power.
2. Remove wire leads.
3. Measure resistance.
4. Replace wire leads.
5. Reassemble all parts and panels before operating.
6.
Plug in microwave oven or reconnect power.
1.
Unplug microwave oven or disconnect power.
2.
Remove wire leads.
3. Measure resistance (ohmmeter scale: Rx1).
4. Replace wire leads.
5. Reassemble all parts and panels before operating.
6. Plug in microwave oven or reconnect power.
1. Unplug microwave oven or disconnect power.
2. Remove wire leads.
3.
Measure resistance.
4. Replace wire leads.
5. Reassemble all parts and panels before operating.
6. Plug in microwave oven or reconnect power.
Results - Resistance
Normal = Continuity
Abnormal = Infinite
Primary Winding =
40 Ω (approximately)
Secondary Winding =
0.4 Ω (approximately)
Normal = Continuity
Abnormal = Infinite
17
Component Location
Not shown
R
Not shown