Precautions For Installation - Rointe SYGMA Manuel D'installation Et D'utilisation

An installation kit is included in the packaging. Follow the instructions below:
An installation kit is included in the packaging. Follow the instructions below: An installation kit is included in the packaging. Follow the instructions below:
1. Choose the right part of the wall.
1. Choose the right part of the wall. 1. Choose the right part of the wall.
2. Place the mounting stencil on the wall, marking the places for the holes. 2. Place the mounting stencil on the wall, marking the places for the holes. 2. Place the mounting stencil on the wall, marking the places for the holes.
3. Remove the stencil and make the holes in the wall.
3. Remove the stencil and make the holes in the wall. 3. Remove the stencil and make the holes in the wall.
4. Insert the rawl plugs (A) in the holes made.
4. Insert the rawl plugs in the holes made. 4. Insert the rawl plugs in the holes made.
5. Screw the plastic bracket (B) to the wall with the Ø5.5 x 50 mm screw (C).
5. Screw the plastic fastener to the wall with the Ø 5.5 x 50 mm screw. 5. Screw the plastic fastener to the wall with the Ø 5.5 x 50 mm screw.
6. Screw the two brackets for supporting the product (D + E) to the horizontal tube of
6. Screw the two brackets for supporting the product and the plastic fastener to the 6. Screw the two brackets for supporting the product and the plastic fastener to the
the product like in Figure 1 with the Ø6 x 35mm screw (F).
horizontal tube of the product like in Figure 1 with the Ø 8 x 26 mm screw. horizontal tube of the product like in Figure 1 with the Ø 8 x 26 mm screw.
7. Insert what you have assembled in Section 6 into the plastic piece (B). Fix well with
Ø 5 x 12 mm screw. Ø 5 x 12 mm screw.
8. Place the cap (G) on the piece supporting the product (E).
8. Place the cover on the piece supporting the product. 8. Place the cover on the piece supporting the product.
Nº.
Nº. Nº. A ITEM ITEM
Ø 10 x 45 mm rawl plug
1 1 Ø 10 x 40 mm Rawl Plug Ø 10 x 40 mm Rawl Plug
B
Plastic Bracket
2 2 Bracket Bracket
C
Ø 5.5 x 50 mm screw
3 3 Ø 5.5 x 50 mm Screw Ø 5.5 x 50 mm Screw
D
Plastic Bracket
4 4 Ø 5 x 12 mm Screw Ø 5 x 12 mm Screw
E
Plastic Bracket
5 5 Bracket Insert Bracket Insert
F
Ø 6 x 35 mm screw
6 6 Bracket Head Bracket Head
G 7 7 Ø 8 x 26 mm screw Ø 8 x 26 mm screw
Plastic Bracket Cap
8 8 Cap Cap
H
9 9 Product Product
I
Product
INSTALLATION AND SAFETY PRECAUTIONS (UNE-EN 60335 REGULA-
TION) ONLY AVAILABLE ON THE FRENCH MARKET
Before starting the heater, read the "Installation and Safety Precautions" carefully to ensure
proper operation of the heater.

PRECAUTIONS FOR INSTALLATION

The towel rail is designed for domestic or residential use. We recommend that the towel
14 14
28 28
ITEM
1 1
2 2
4 4
5 5
3 3
6 6
9 9
8 8
7 7