Software Upgrade - Samsung HW-H600 Manuel D'utilisation

Masquer les pouces Voir aussi pour HW-H600:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FUNCTIONS

SOFTWARE UPGRADE

Samsung may offer upgrades for the SoundStand's
system firmware in the future.
If an upgrade is offered, you can upgrade the firmware
by connecting a USB device with the firmware upgrade
stored on it to the USB port on your SoundStand.
Note that if there are multiple upgrade files, you must
load them onto the USB device singly and use them to
upgrade the firmware one at a time.
Please visit samsung.com or contact the Samsung call
conter to receive more information about downloading
upgrades files.
● Insert a USB device containing the firmware
upgrade into the USB port on the main unit.
● Do not disconnect the power or remove the
USB device while upgrades are being
applied. The main unit will turn off
automatically after completing the firmware
upgrade.
When software is upgraded, all settings are
reset to their factory default settings.
We recommend you write down your settings
so that you can easily reset them after the
upgrade.
● Once the software upgrade is completed,
turn off the product and then press and hold
the (►) button for a while to reset the
product.
● If the firmware fails to upgrade, we
recommend formatting the USB device in
FAT16 and trying again.
● Do not format the USB device in the NTFS
format. The SoundStand does not support
the NTFS file system.
● Depending on the manufacturer, some USB
devices may not be supported.
20

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hw-h610

Table des Matières