Abicor Binzel ABIPLAS WELD 100 POWDER W Mode D'emploi page 24

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Personal protective equipment
(PPE)
2.3 Classification of the warnings
2.4 Special warnings for operation
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Signs and symbols used
3.4 Nameplate
3.5 Signs and symbols used
4 Scope of delivery
5 Functional description
6 Putting into operation
6.1 Setting up the torch
6.2 Torch handle control elements
6.2.1 Trigger up/down function
6.3 Attaching the connector to the
device
6.4 Connecting the coolant
6.5 Setting the gas flow rate
7 Operation
7.1 Before switching on
7.2 Welding process
EN - 2
ABIPLAS
8
EN-3
EN-3
9
EN-3 9.1
EN-3 9.2
10
EN-3
EN-4
11
EN-4
EN-5
EN-5
EN-5
EN-8
EN-8
EN-9
EN-9
EN-9
EN-10
EN-11
EN-12
EN-14
EN-14
EN-15
EN-15
EN-16
EN-17
EN-18
EN-18
®
WELD 100/150 POWDER W
Putting out of operation
Maintenance and cleaning EN-19
Cleaning the torch body
Cable assembly
Troubleshooting
Disposal
BAL.0086 • 2021-08-19
EN-18
EN-20
EN-21
EN-21
EN-23