Worx WG583E Mode D'emploi page 15

Battery indicator light
See details in BATTERY STATUS part
IMPORTANT:
When only one light is illuminated,
your battery is overly discharged,
even though the machine may still
be capable to work. Continuing
to operate your machine with the
battery in this discharged condition
may reduce the life and performance
of your battery.
When no light is illuminated, at least
one battery is not fully installed or
battery may be defective, please
double check the batteries are fully
seated into position.
OPERATION
Blow mode
Assembling the Blower Tube and fan
housing cover
On/Off Switch
WARNING! The tool runs for a
few seconds after it has been
switched off.
Let the motor come to a complete
standstill before setting the tool
down.
Using the Blower
USER TIPS
- Hold the blow tube approximately 8"
above the ground when operating the
tool.
- Use a sweeping motion from side to side.
Advance slowly keeping the accumulated
debris/leaves in front of you.
Caution!
Do not blow hard objects such
as nails, bolts, or rocks.
Adjusting the blowing speed
NOTE:the speed your tool keeps each
time you turn it on is the speed when
you turned it off last time. If necessary,
please readjust the speed.
Vacuum mode
Disassembling the blower tube and fan
housing cover
Assembling the vacuum Tube and wheel
Assembling he Leaf Collection Bag
Cordless Blower/Vac/Mulcher
On/Off Switch
WARNING! The tool runs for a
few seconds after it has been
switched off.
Let the motor come to a complete
standstill before setting the tool
down.
See Fig. D
Using the Vacuum
NOTE:It is recommended to use high
speed for best vacuum performance.
Disassembling the vacuum Tube and the
Leaf Collection Bag
Emptying the Leaf Collection Bag
Removing Clogged Debris from the
Impeller(no tool included)
NOTE: Ensure to remove the
batteries before attempting to clear
See Fig.
any debris.
E1,E2,E3
BATTERY STATUS (See Fig. D)
• Before starting or after use, press the button beside
the power indicator light on the machine to check
the battery capacity.
See Fig. F
• During operation, the battery capacity will be
indicated automatically by the battery power
indicator. The indicator constantly senses and
displays the battery condition as follows.
• For the machine with 2 battery packs with different
power, the power indicator light displays the battery
condition with the lower one of the two batteries.
Battery indicator
See Fig.G
light status
Five green lights
(
illuminated.
Two, three or four
green lights are il-
See Fig.H
luminated.
Only one green light
(
luminated.
See Fig. I1,I2
No light is
See Fig.
illuminated.
J1,J2
See Fig. J3
Battery condition
The two batteries are in a
) are
highly charged condition.
The two batteries have a
remaining charge. The more
lights are illuminated, the
more battery capacity.
The battery level of at least
one battery pack is very low.
) is il-
Please check and charge the
battery pack.
At least one battery is not fully
installed or battery may be
defective.
See Fig.F
See Fig. K
See Fig.L1,L2
See Fig.
M1,M2
See Fig. N
15
EN