Specification Chart; Safety Guidelines; Important Safety Instructions - Craftsman 919.724321 Manuel Du Propriétaire

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Model No.

Running HP

Bore

Stroke

Voltage-Single Phase

Minimum Branch Circuit Requirement

Fuse Type

Air Tank Capacity

Approx. Cut-In

Approx. Cut-out

SCFM @ 40 psig

SCFM @ 90 psig

Refer to Glossary for abbreviations

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these symbols.

which, if not avoided, will result in death

or serious injury.

which, if not avoided, could result in

death or serious injury.

IMPORTANT SAFETY INSTRUCTIONS

cals known (to the State of California) to cause cancer, birth defects or

other reproductive harm. Some example of these chemicals are:

•

lead from lead-based paints

•

crystalline silica from bricks and cement and other masonry products

•

arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do

this type of work. To reduce your exposure to these chemicals: work in

a well ventilated area, and work with approved safety equipment, always

wear MSHA/NIOSH approved, properly fitting face mask or respirator when

using such tools.

When using air tools, basic safety precautions should always be followed

to reduce the risk of of personal injury.