Craftsman 919.724321 Manuel Du Propriétaire page 10

A14411
Assemble Wheels
support one side of the outfit when
installing the wheels because the
compressor will have a tendency
to tip.
1. Attach wheels with shoulder
bolts and nuts as shown.
Nut
Tighten securely. NOTE: The out-
2.
fit will sit level if the wheels are
properly installed.
provide adequate clearance, stabil-
ity or support for pulling the unit
up and down stairs or steps. The
unit must be lifted, or pushed up a
ramp.
Assemble Rubber Feet
1. Attach rubber feet with the
screws provided as shown in
previous figure.
2. Tighten securely.
10- ENG
It will be neces-
sary to brace or
Rubber
Feet
Screw
Wheel
Shoulder
Bolt
The wheels and
handle do not