At The End Of The Programme - ARTHUR MARTIN AW6S7054AW Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

18
Opening the door - Adding
garments
If the temperature and level of
the water in the drum are too
high and/or the drum is still
rotating you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked and
the indicator
is on.
1. Touch the button Départ/Pause
pause the appliance.
Wait until the door lock indicator
off.
2. Open the appliance door. If necessary,
add or remove the items.
3. Close the door and touch the Départ/
Pause
button.
The programme or the delay start
continues to operate.

At the end of the programme

When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is activated).
The indicator of the button
The door unlocks and the indicator
goes off.
• The indicator
• Remove the laundry from the
appliance.
• Make sure that the drum is empty.
• Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
The washing programme is completed,
but there is water in the drum:
goes
goes off.
is on.
• The drum turns regularly to prevent the
creases in the laundry.
• The door lock indicator
indicator
locked.
• You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin speed.
If you set
drains.
to
2. Press
water and spins.
3. When the programme is completed
and the door lock indicator
off, you can open the door.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and spins
automatically after
approximately 18 hours (except
for Wool programme).
Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
• All indicators go off.
• The indicator of the
• Press one of the options to deactivate
the energy saving status.
If you set a programme or an
option that ends with water in
the drum, the energy saving
status function doesn't
activate to remind you to drain
the water.
is on. The
flashes. The door stays
, the appliance only
. The appliance drains the
flashes slowly .
goes

Publicité

Chapitres

Table des Matières
loading

Table des Matières