ARTHUR MARTIN AW6S7054AW Notice D'utilisation page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Make sure that the detergent divider is
inserted properly and does not cause a
blockage when you close the drawer.
Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Départ/Pause
button flashes.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons.
If a selection is not possible
the indicator
Starting a programme
Touch the Départ/Pause
start the programme. It is not possible to
start the programme when the indicator of
the button is off and doesn't flash (e.g.
programme dial on a wrong position).
The related indicator stops flashing and
stays on.
The programme starts, the door is locked.
The indicator
is on.
Starting a programme with the
delay start
1. Touch the
button to set the delay
you want to set.
The indicator of the set delay is on. The
indicator
is on.
2. Touch the Départ/Pause
The appliance locks the door and
starts the countdown. When the
countdown is completed, the
programme starts automatically.
You can cancel or change the
set of the delay start before you
press the
To cancel the delay start :
flashes red.
button to
button.
.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Départ/Pause
pause the appliance. The related
indicator flashes.
2. Touch the
button repeatedly until
the indicator of the set delay goes off.
3. Touch the Départ/Pause
again to start the programme
immediately.
Interrupting a programme and
changing the options
You can change only some options before
they operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance could
drain the water. In this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
17
button to
button

Publicité

Chapitres

Table des Matières
loading

Table des Matières