Empire Comfort Systems Mantis Instructions D'installation page 32

REMOTE FUNCTIONING MODES
Manual Mode
In manual mode you can adjust the fireplace's heat output up or
down by changing the flame level. See Figure 49. Press the mode
button on the remote control to select MANUAL mode. The mes-
sage MAN and the flame symbol
in manual mode, use the up and down button to move through the
five flame levels.
Press arrow up to increase flame level or press arrow down to
decrease flame level. The current setting is shown by the number
of bars appearing under the flame symbol. When all five
bars are shown, the message MAX also appears under the flame
symbol to show that the fireplace is set to maximum flame level.
When you are in manual mode, the flame symbol appears in solid
black.
MAN
Figure 49
Page 32
All manuals and user guides at all-guides.com
REMOTE INSTRUCTIONS
appear on the display. Once
Switching from Manual to Thermostatic Mode
To switch from MANUAL to THERMOSTATIC mode, press the
mode button. The message MAN disappears and the message
AUTO appears instead. The flame level bars also disappear along
with the flame symbol. In their place the digits for setting room
temperature appear. See Figure 50.
AUTO
Figure 50
THERMOSTATIC Mode
Whereas MANUAL mode only lets you adjust the flame level and
maintain that setting until you change it again, THERMOSTATIC
(AUTO) mode lets you set the temperature you want to maintain
in the room. In thermostatic mode the fireplace automatically
adjusts flame power level to reach the set room temperature.
After you switch to THERMOSTATIC mode, use the up and down
button to change the room temperature setting.
Press arrow up to increase the temperature setting or arrow down
to decrease it. The current setting is shown below the clock (Figure
51).
AUTO
Figure 51
31793-3-1015