Empire Comfort Systems Mantis Instructions D'installation page 30

SETTINGS REQUIRED PRIOR TO INITIAL START-UP
Setting the Time and Day
When batteries are inserted into the remote control, as during ini-
tial set up or when replacing the batteries, the remote will auto-
matically enter the clock setting menu. To reset the time without
removing the batteries, simultaneously press the "O" and Mode
buttons on the remote control for five seconds to enter the clock
setting menu (Figure 44).
Figure 44
As soon as the first two digits of the clock begin flashing use the
up and down button to set the current hour (24 hour clock) then
press the "O" button to confirm the new setting (Figure 45). Repeat
the procedure to set the minutes and then the day. When you have
finished setting the time and the day, press the "O" button again to
confirm you settings and exit the menu.
Figure 45
Page 30
All manuals and user guides at all-guides.com
REMOTE INSTRUCTIONS
The days of the week are indicated by two-letter codes.
MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
Note: If the keypad is not used for seven seconds, the remote
control automatically exits the clock setting menu and assumes
the last settings entered.
Setting the Units of Temperature Measurement
You can choose to use either degrees Celsius or Fahrenheit as the
temperature units of measure.
The remote must be turned off (no backlight) before you can
change the temperature units of measure. Press and hold the
power button until the screen backlight turns off. Press and hold
the Mode button (Figure 47) for at least five seconds to switch
fireplace measure between degrees Celsius (°C) and degrees
Fahrenheit (°F).
The remote control's default setting is degrees Celsius (°C).
Press and hold the power button until the screen lights to turn
remote on.
Figure 46
31793-3-1015