Hold Function; See Second Decimal Point (Not Verified Value) - KERN MCC 250K100M Mode D'emploi

9.3 HOLD function

The balance has an integrated standstill function (mean value calculation). This
allows correct weighing determination of a person although the latter is not keeping
still on the seat surface.




(Example)
There is no average value calculation in the event of too much
movement.

9.4 See second decimal point (not verified value)

Press and hold for about 2 s whilst weighed result is being shown. The second
decimal place will be shown for approx. 5 s.
MCC-M-BA-e-1616
Start balance by pressing
Wait for stability display „STABLE to appear.
Press , in the display „---------" will appear and the
„HOLD" symbol appears.
Seat person in the centre of the seat pan.
After a short time the stability display „STABLE" appears and
the weighing value of the person is displayed and „frozen".
After unloading the balance, the weighing value remains
displayed for approx. 10 seconds, than the balance changes
automatically into the weighing mode.
The symbol „HOLD" disappears.
.
31