Operation; Weighing - KERN MCC 250K100M Mode D'emploi

9 Operation

After taking chair scales to patient, ensure scales are level before starting the
weighing process. See diagram below

9.1 Weighing


• However, you can reset the weighing scale to zero by pressing




• If a person is heavier than the maximum weighing range, "OL"
MCC-M-BA-e-1616
Start balance by pressing
The balance will carry out a segment test.
The scales are ready for operation as soon as the weight
display for "0.0kg" has appeared.
the key.
Seat person in the centre of the seat pan.
Fold down the foot rests and place the patient's feet on the
respective foot rest.
Wait for stability display "STABLE", then read the weighing
result.
Once the weighing process is completed fold up the foot rests.
(overload) will appear on the display screen.
29