TEFAL BL800GAU Mode D'emploi page 16

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS
Appliance does not
work
The appliance stopped
while in use
Excessive vibrations
Leak from the lid
Leak at the bottom of
the blender jug
The blade does not
turn easily
CAUSES
The plug is not
connected
The blender jug is not
positioned correctly on
the motor unit
Overload
The product is not placed
on a flat surface
Volume of ingredients is
too high
Volume of ingredients is
too high
The lid is not correctly
positioned
The blender jug gasket
(e2)
seal is not positioned
correctly or is absent
Pieces of food too large
or too hard
Liquid has been blended
that was too hot and
distorted the gasket seal
13
SOLUTIONS
Connect the appliance
to a socket with the
same voltage as that on
the rating plate of the
appliance.
Check that the blender
jug is positioned properly
on the motor unit as
explained in the leaflet.
Follow the instructions in
§ First use.
Place the appliance on
a flat surface.
Reduce the quantity of
ingredients processed.
Reduce the quantity of
ingredients processed.
Place the lid correctly on
the blender jug.
Reposition the gasket
seal and lock the blade
holder correctly.
Replace the gasket seal
with a new one.
Reduce the size or
quantity of ingredients
processed.
Add liquid.