Before The First Use - TEFAL BL800GAU Mode D'emploi

BEFORE THE FIRST USE

• Clean all the parts
(A)
motor unit
ning water (see § Cleaning).
CAUTION: The blades are extremely sharp; handle them with caution
when using or cleaning the appliance.
• Make sure all the packaging has been removed before operating the
appliance
Important note:
•
jug on the motor unit
• The appliance will start only if the blender jug is positioned correctly on the
motor unit.
Do not operate the appliance if the lid is not in place.
•
ASSEMBLING AND FITTING THE JUG
• Fit the gasket seal
• Place the assembly
the blade unit through a quarter turn in an anticlockwise direction
• Introduce the ingredients to the assembled jug.
(e4)
• Place the lid
lid.
• Place the blender jug assembly
can be placed in two positions: jug handle to the right or the left of the
(Fig. 3).
motor unit
USING YOUR APPLIANCE FOR THE FIRST TIME
• Once the blender jug is positioned correctly on the motor unit, plug in the
appliance and turn it on using the desired function.
Speed selection:
•
speed increases gradually between
this speed as required during preparation.
"Pulse" function:
•
succession of pulses gives finer control over the degree of blending for
precise preparations. In this position, the appliance starts directly on
maximum speed. It stops as soon as you release the knob.
(E)
with warm water and washing up liquid except for the
which must never be immersed in water or placed under run-
Turn the control knob
(A)
.
(e2)
on the blade unit
(e1+e2)
on the base of the jug
on the jug. Place the measuring cup
Turn the control knob
Turn the control knob
(D)
to
0
(e1) (Fig.1)
(E)
on the motor unit
(D)
to choose the desired speed; the
min " "
and
(D)
to the
10
before placing the blender
.
(e3)
. Lock it by rotating
(e5)
in its slot on the
(A)
. The blender jug
max " ".
You can change
"Pulse"
position. Using a
(Fig.2).