Technical Data - FilterMaster OSMOPOWER 2.0 Mode D'emploi

Membrane:
The membrane usually has a life of several years when using tap water with medium hardness and back-
flushing it regularly. After that, it must be replaced.
Protect the membrane against frost and drying out.
Downtime:
The system can be switched off for a longer time without any problems. If a downtime of the system for
more than six weeks is planned, we recommend to fill it with disinfectant. When restarting the system,
flush it for approx. 15 to 20 minutes. This is also recommended in the event of shorter downtime periods.

Technical data

Ratio of osmosis water – residual water
Working pressure
Temperature
High-quality membrane
Pressure retention capability
Baseline water values
Max. performance
10
Performance under practical conditions
Accessories for aquaristic, terraristic and pet needs
can be ordered at Papillon, e.g.:
Care utensils

Water conditioners

Food

Loose filter media

Filtermaster replacement sponge

suitable for Eheim filter systems

1 : 3-4 adjusted
(dependant on temperature and pressure of tap water)
3–8bar
1–30 °C
TFM polyamide – polysulfone
95%
10–40 microsiemens
190l/day (50 GDB)
with a working pressure of 4bar at 25°C (drinking water has
an osmotic pressure of less than 2bar)
100 - 170l/day
with a working pressure of 3-6bar at 10-15°C
Please only use original spare parts
Superfine prefilter
Activated carbon filter
Osmosis membrane
Ultrapur Resin end filter
Ultrapur Resin refill 1l
Osmosis hose 3m
Art. 00639
Art. 00638
Art. 00634
Art. 00637
Art. 00636
Art. 00635