Using Sleep Timer - JVC FS-L30 Manuel D'instructions

• Each time you press these buttons, the timer mode and
the source change as follows:
DAILY TUNER
DAILY
TAPE
DAILY
TUNER : tunes in to the last station you were
listening to. (Daily Timer)
REC TUNER : records the last station you were listening
to. (Recording Timer)
• Put a recordable cassette into the deck.
DAILY CD : plays a CD. (Daily Timer)
• Load a CD.
DAILY
TAPE : plays a tape. (Daily Timer)
• Make sure that the tape direction is correct.
5
Press UP or DOWN to set the volume level,
then press CLOCK/TIMER.
• You can select the volume level ("VOLUME – –" and
"VOLUME 0" to "VOLUME 40").
If you select "VOLUME – –," the volume is set to the
last level when the unit has been turned off.
• To turn off the volume while the Recording Timer
REC TUNER) is working, set the volume level
(
"VOLUME 0."
The unit enters the clock setting mode.
UP
DOWN
CLOCK
/TIMER
6
Adjust the clock.
• See "Setting the Clock" on page 9.
7
Press STANDBY/ON
turn off the unit (on standby) if
you have set the timer with the
unit turned on.
• When the timer turns on the unit,
(timer) indicator and the selected timer
mode indicator (DAILY or REC) start
flashing.
To cancel the setting, press and hold CLOCK/TIMER until
(timer) indicator goes off from the display.
• If the unit is turned on when the timer-on time comes
Timer does not work.
• When you unplug the AC power cord or if a power failure
occurs
The timer will be canceled. You need to set the clock first, then
the timer again.
EN17-22_FS-L30[C]f
All manuals and user guides at all-guides.com
REC TUNER
DAILY CD
DOWN UP
CLOCK/TIMER
STANDBY/ON
to
STANDBY / ON
20

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator lights up on the
display.
• Each time you press the button, the time length changes
as follows:
SLEEP 10
Canceled
2
Wait for about 5 seconds after specifying the
time length.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
• If you set the Sleep Timer after Daily Timer starts playing the
selected source
Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording
Recording Timer is canceled, but recording continues until Sleep
Timer shuts off the power.
– 20 –
02.2.13, 3:48 PM
SLEEP 20 SLEEP 30
SLEEP 60
SLEEP120 SLEEP 90
SLEEP