Programming The Playing Order Of The Tracks -Program Play - JVC FS-L30 Manuel D'instructions

To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows
you to start playing the track number
you want.
Ex.: For track number 5, press 5.
For track number 15, press
+10, then 5.
For track number 20, press
+10, then 10.
For track number 32, press
+10, +10, +10, then 2.
To locate a particular point in a track
During play, press and hold ¢
or 4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
Programming the Playing Order of the Tracks
—Program Play
You can arrange the order in which tracks play before you
start playing. You can program up to 20 tracks.
On the remote control ONLY:
1
Load a CD.
• If the current playing source is not the CD player, press
CD 3/8, then 7 before going to the next step.
2
Press PRGM (program).
The PRGM (program) indicator lights up on the
display.
ST
PRGM
• If a program has been stored in memory, the program is
called up.
3
Press UP or DOWN to select the
track number, then press SET.
• You can select the track number directly
using the number buttons. (See "To go to
another track directly using the number
buttons.")
ST
PRGM
Track number
EN13-16_FS-L30[C]f
All manuals and user guides at all-guides.com
1
2
4 5
7 8
10
4 ¢
DOWN
UP
DOWN
SET
Program step number
14
4
Repeat step 3 to program other tracks you
want.
5
Press CD 3/8.
3
The tracks are played in the order you have
6
programed.
9
To stop playing, press 7.
+10
To exit from Program Play mode, press PRGM before or
after playing. The PRGM (program) indicator goes off.
To erase the program, press 7 twice.
• Disc ejection also erases the program.
If you try to program the 21st track
"FULL" will appear on the display.
UP
To check the program contents
You can check the program contents
by pressing ¢ or 4 before or
after playback.
• ¢ :
To check the contents in the
programmed order.
• 4 :
To check the contents in the
reverse order.
To modify the program
On the remote control ONLY:
Before or after playing, you can erase the last
programed track by pressing CANCEL.
PRGM
• Each time you press the button, the last
programed track is erased from the program.
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 3 of the
programming procedure.
– 14 –
02.2.13, 3:47 PM
Continued
3/8
CD
4 ¢
DOWN UP
CANCEL