Connecting Other Equipment - JVC FS-L30 Manuel D'instructions

To remove the speaker grilles
The speaker grilles are removable.
To remove the speaker grille, insert your fingers at the top
of the speaker grille, pull towards you. Then pull the bottom
towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.

Connecting Other Equipment

You can connect both of the analog and digital equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.
To audio output
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords (not
supplied).
EN01-12_FS-L30[C]f
All manuals and user guides at all-guides.com
Holes
Projections
Speaker grille
R
AUX
R
L
L
Audio equipment
R
8
To connect audio equipment with an optical digital
input terminal
You can record CD sound onto the connected digital
equipment.
Before connecting the other
equipment, remove the protective plug
from the terminal.
To optical digital input
Connect an optical digital cord (not supplied) between the
optical digital input terminal on the other equipment and the
OPTICAL DIGITAL OUT terminal.
Now, you can plug the AC power cord.
IMPORTANT: Be sure to check all connections to be
done before plugging the AC power cord into a wall outlet.
L
– 8 –
02.2.13, 3:47 PM
OPTICAL DIGITAL
Protective plug
OUT
Audio equipment with
an optical digital input