Table des Matières
Publicité
INOXPAN S.L.
EN – INSTALLATION
EN – SAFETY INFORMATION
Please read these safety and installation instructions before using the motor.
Motors should only be used when connected to the hood
WARNING! Before usage or any maintenance operations are carried out, make sure
the power is disconnected, (cut-off switch or differential) and make sure the impeller
is completely stationary.
WARNING! Motor fans have blades with sharp edges that can cause injury.
The air outlet of the appliance must not be connected to a flue which is used for
exhausting other fumes from appliances, such as a central heating, boilers etc.
Ventilate the room suitably according to the laws in force when the appliance is
working together with gas, oil or coal burning appliances, at the same time.
Before connecting the cooker hood to the mains supply, make sure that the voltage
indicated in the rating plate corresponds to the mains voltage in the home.
An appropriate maintenance ensures a good working and a good performance in the
long run.
EN – TRANSPORT AND STORAGE
All motors are packaged for normal handling during transport. When handling,
use adequate elevation equipment to avoid damaging the motor and injuring
personnel.
WARNING! Do not lift the fans by their cable, the connection box, the impeller or the
suction cone.
EN – INSTALLATION
Avoid impact and shaking of the equipment. Store the motors in a dry place and
protected from the elements until final installation.
An installation manual with illustrations and explanations is included.
The motor must always be connected to an extractor hood, never directly to the
mains.
Bear in mind the safety information given above. Installation, electrical connection
and start- up should only be carried out by authorized/specialized personnel.
9
Publicité
Table des Matières
