Specifications; Recommended Tools; Safety Precautions; Items Required For Operation - Maverick BLACKOUT XB Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Specifications

 
Engine
Length
Width
Height
Wheel base
Drive System
Gear Ratio
Diameter of wheel
Width of wheel
Receiver Battery
Fuel Tank Capacity
Transmitter
Receiver
Steering Servo
Throttle/Brake Servo

Recommended Tools

These tools are not included with the product but are recommended for use whilst working with this vehicle
Hexagonal Screwdrivers 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, Side Cutters, Needle Nose Pliers, Flat Blade & Philips Screwdrivers,
24mm Wheel Wrench, Cross Wrench and Thread lock.

Safety precautions

This product is an authentic radio controlled vehicle (RC vehicle) and it is not a toy. Read and understand this instruction manual thoroughly
before running the model. If you are not familiar with RC vehicles, we recommend that you ask someone familiar with RC vehicles for advice.
This product uses a mixture of unleaded petrol and 2-stroke oil for fuel. Please use extreme caution when handling petrol.
Do not run near open flames or smoke while running your model or while handling fuel
Always store fuel in a well ventilated place, away from heating devices, open flames, direct sunlight or batteries.
Keep fuel away from children.
Petrol is flammable and poisonous. Petrol powered model engines emit poisonous vapours. These vapours irritate eyes and can be highly
dangerous to your health.
You must only use a mixture of petrol and 2-stroke oil as fuel for this engine. Never use glow nitro fuel intended for RC Cars.
After running, please empty the fuel tank before storing the car.
Never run RC models near people or animals, or on public streets or highways. This could cause serious accidents, personal injuries, and/or
property damage.

Items required for operation

8 * AA Batteries for the Transmitter
Unleaded Petrol
2-Stroke Engine Oil
Use Ratio of 25:1 petrol to 2-stroke oil

Charging the battery pack

Always use the included charger for the included battery pack. Do not use any other battery packs. Charging time for an empty battery pack is
about 6 hours. Do not charge the battery pack longer than 6 hours to avoid overheating and battery damage.
Cautions
This charger can be used only for the battery pack included in this kit.
Do not charge the battery pack for longer than 6 hours. Overcharging generates excessive heat and will damage the battery pack.
Use the charger with adult supervision. Do not use the charger near water or when wet.
Do not use the charger if the wire is frayed or worn. If the wire is frayed or worn a short circuit can cause a fire or burns.
If you are not sure about the level of the battery pack before charging use it in the vehicle until the vehicle slows, leave to cool and then
recharge.
Blackout MT 
ME- 243 30CC Engine
740mm
600mm
350mm
516mm
4WD
12.6:1
212mm
140mm
MBX - 24 6V 2500mAh Ni-MH
700CC
MTX - 242 2.4 GHz 2Ch Transmitter MTX - 242 2.4 GHz 2Ch Transmitter MTX - 242 2.4 GHz 2Ch Transmitter
MRX - 242 2.4 GHz 3Ch Receiver
MS - 241 Steering Servo 20kg *2
MS - 242 Throttle Servo 9kg
Blackout ST 
ME- 243 30CC Engine
815mm
490mm
285mm
516mm
4WD
9.6:1
178mm
80mm
MBX - 24 6V 2500mAh Ni-MH
700CC
MRX - 242 2.4 GHz 3Ch Receiver
MS - 243 Steering Servo 30kg
MS - 242 Throttle Servo 9kg
2
Blackout XB 
ME- 243 30CC Engine
720mm
490mm
285mm
516mm
4WD
9.6:1
178mm
80mm
MBX - 24 6V 2500mAh Ni-MH
700CC
MRX - 242 2.4 GHz 3Ch Receiver
MS - 243 Steering Servo 30kg
MS - 242 Throttle Servo 9kg

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Blackout stBlackout mt

Table des Matières