Side View; Tipping Radius; Product Dimensions; Front View - KitchenAid Architect Serie Guide D'installation

Tipping Radius

Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
The dolly wheel height must be added to the tipping radius
when a dolly is used.
If needed, the tipping radius can be reduced. See "Reduce
Tipping Radius."
Side Tipping Radius (36" [91.4 cm] Models)
¹⁄₂
90
(229.9 cm)
A. Tip this side only.
Side Tipping Radius (42" [106.7 cm] Models)
93"
(236.2 cm)
A. Tip this side only.

Product Dimensions

Side View

The depth from the front of the top grille to the back of the
refrigerator cabinet is 25³⁄₈" (64.5 cm).
The power cord is 84" (213 cm) long.
The water line attached to the back of the refrigerator is 5 ft
(1.5 m) long. Height dimensions are shown with leveling legs
extended ¹⁄₈" (3 mm) below the rollers.
8
A
"
A
³⁄₈
*83 "
(211.8 cm)
84" (213.4 cm)
Power Cord
*When leveling legs are fully extended to 1¹⁄₄" (3.2 cm) below
rollers, add 1¹⁄₈" (2.9 cm) to the height dimensions.
Top View
36" (91.4 cm) Models
35
(89.5 cm)
42" (106.7 cm) Models
¹⁄₄
41
(105 cm)

Front View

Width dimensions were measured from trim edge to trim
edge.
Height dimensions are shown with leveling legs extended ¹⁄₈"
(3 mm) below the rollers.
A
¹⁄₂
23 "
(59.7 cm)
¹⁄₂
*3 " (8.9 cm)
¹⁄₄
"
³⁄₈
25 "
(64.5 cm)
"
³⁄₈
25 "
(64.5 cm)