gdw 1308 Mode D'emploi page 5

Hyundai Terracan
2001 - ....
Ref. 1308
Fitting instructions
1) Place the tow bar with the points (A) and the mounting plates (ref.1) against the underside of the chassis on
the provided drillings.
Place the mounting pieces (ref.2) on the chassis, insert the bolts and washers and tighten firmly (see tension).
2) Place the flange ball 50T, insert the bolts and washers and tighten also firmly
Composition
1 tow bar reference 1308
1 flange ball 50T
2 bolts M16x50 – DIN 933
2 security washers M16 – DIN 128A
2 nuts M16 – DIN 934
1 security shackle 50T
4 bolts M12x140 – DIN 931
4 security washers M12 – DIN 128A
4 nuts M12 – DIN 934
4 washers 40x35x12x4mm
2 mounting plates (ref.1)
2 mounting pieces (ref.2)
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(A)
(A)
(A)
(A)
All bolts and nuts: quality 8.8