SXT Scooters Raptor 1200 Mode D'emploi page 19

between the tire bead and the wheel rim. If you have trouble getting the
last few inches of bead over the edge of the rim with thumb pressure,
use a tire lever and be careful not to pinch the tube.
CAUTION IF YOU USE A SCREWDRIVER OR ANY TOOL OTHER
THAN A TIRE LEVER, YOU ARE LIKELY TO PUNCTURE THE TUBE.
6. Check to make sure that the tire is evenly seated around both sides
of the rim and that the tube is inside the tire beads. Push the valve stem
into the tire to make sure that its base is seated within the tire's beads.
Inflate the tube slowly to the recommended pressure on the tire sidewall,
all the while checking to make sure that the tire beads stay seated in the
rim.
9 3
GENERAL USAGE NOTES 17 SXT-SCOOTERS