Bowl Mounting; Strainer And P-Trap - Bradley Express ELX Serie Mode D'emploi

Installation
4
Bowl Mounting (to Frame and Wall)
WARNING! Ensure bowl is level and completely seated in the wall bracket.
Secure the bowl to the wall anchors
B
using fasteners per the structural
rough-in requirement (supplied by
installer).
5

Strainer and P-Trap

Ensure not to overtighten the strainer screw.
Thread the strainer screw
A
through the strainer and
into the stand off on the
drain adapter.
Bradley • 215-1816 Rev. D; ECN 16-08-008
Position bowl above wall bracket.
A
Press firmly on the back of the bowl
to seat the bowl flange into the wall
bracket lip. Ensure bowl is level.
Strainer
5/20/2016
ELX-3
11