Joie i-Venture R Manuel D'instructions page 7

Installing the i-base advance
for use with the i-Venture R seat
Installation of i-size ISOFIX Base System
see images -
3 11
!
Install the rebound bar to the base.
Push the rebound bar down into
the base until you hear a click
sound. -1
3
After placing i-Base Advance on the
vehicle seat, adjust the load leg
length to ensure the load leg indicator
shows green and the base is in
contact with the vehicle seat.
!
The load leg has multiple positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position.
!
Make sure the load leg is in full
contact with the vehicle floor pan.
!
Squeeze the load leg releasing
button, then shorten the load leg
upwards. 5
11
3
1
4
4
5
!
Insert ISOFIX guides to assist with
installation. 6 -1
!
There are 9 adjustable positions for
ISOFIX. Press the ISOFIX adjuster
button to extend the ISOFIX.
-2
7
!
Make sure that both ISOFIX
connectors are securely attached to
their ISOFIX anchor points. The
colors of the indicators on both
ISOFIX connectors should be
completely green. -1
8
6
1
7
-1 &
7
2
8
1
1
12