Table des Matières
Publicité
When the temperature cutback period ends
Cancelling a frost-safe period
Selecting a new cutback temperature setting
Child lock
At the time the frost-safe period ends,
the comfort temperature setting will
flash to indicate the need for action.
Press any key to make the comfort
temperature display steadily and that
temperature will now continue.
If you do nothing while the display is
flashing, another frost-safe period will
start automatically after 48 hours.
To end an ongoing frost-safe period,
press
for more than 5 seconds.
When cutback temperature is ongoing,
select the new cutback temperature
you desire by pressing
or
Save the setting by pressing
than 5 seconds.
To lock: Press
and
at the same
time until you see - - in the display.
To unlock: Press
and
at the same
time until you see - - disappear in the
display.
Calibration
20°C
20°C
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any flashing
mode.
.
more
GB/AU
Should the actual room temperature
and Neo's setting not correspond, Neo
should be calibrated.
First let the heater work at the same
temperature setting, preferably for
at least 24 hours, keeping doors and
windows closed. This makes certain
that Neo that is controlling room
temperature.
Hold down on
and press once on
Release
. ºC will flash 3 times and
the setpoint temperature will flash.
Press
or
until the display shows
the same as the actual measured room
temperature. Store by pressing
5 seconds.
The heater will now work with the
temperature displayed by Neo and af-
ter a period this will correspond with
the actual temperature of the room.
This procedure can be repeated at a
later date to ensure correct calibration.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the
key and then switch the
heater ON.
Hold the
key in for more than 5
seconds until rE starts flashing in the
display.
Release
and HO (Home Mode) will
flash.
You can select between modes HO, OF
(Office) and CA (Cabin) by pressing
the
or
keys.
Confirm your choice by pressing the
key for more than 5 seconds.
22 (°C) will flash. Select your pre-
ferred comfort temperature.
Confirm by pressing in the
key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
for
29
Publicité
Table des Matières
