Sentiotec LAVA Mode D'emploi page 28

Assembly instructions
EN
Garden sauna
LAVA
Exterior dimension:
375 x 319 x 270 cm
Interior dimension:
200 x 200 x 210 cm
200 x 104 x ~260 cm
Wall thickness:
70 mm
Dear customer,
Before you begin with the work, check that all the individual parts have been delivered against the parts list.
If you discover any missing parts, notify your dealer within 14 days of receiving the sauna cabin.
Keep the delivery note, the invoice and the assembly instructions in a safe
place in case of any questions.
You require the following tools:
1 hammer with a wooden head or a rubber hammer
1 cordless screwdriver with bits for cross-head screws and Torx
1 roller tape measure
1 drill bit Ø10 mm; 1 drill bit Ø3 mm
1 spirit level
1 pencil
You need an assistant for the assembly. We also advise you to pre-drill the holes for
the screws.
!
The electrical connection may only be performed by a qualified electrician or similarly
qualified person.
02
There may be slight deviations in the dimensions.
Subject to technical modifications and misprints.