Sentiotec LAVA Mode D'emploi page 48

Assembly instructions
EN
First, put the mounting slats of the
door and the screws in the cabin.
Then place the door element in the
doorway, take the top slat (1), place
it so that left and right is the same
and screw the slat to the door.
Next, screw on the side mounting
slats. (2). Finally, screw on the bottom
slat.
The full glass door for the sauna
area is assembled in the same way.
The doors need to be assembled so
that they open outwards!
Screws 3.2 x 40 mm
Fig. 1.35
1.
2.
Fig. 1.36
22