Table des Matières
Publicité
Safety Instructions
•
Read the operating instructions carefully before connecting and putting into operation.
Observe the safety instructions! If the Digimar M is connected to additional instruments (e.g.
a computer, printer, etc.) observe the appropriate operating instructions
•
The height Measuring Instrument Digimar M complies with the relevant safety provisions.
•
This instrument may only be used for the intended purposes i.e. for height measurements
and for marking and scribing components.
•
Ever put you hands between the scriber and test sample. Danger!
•
Before maintenance and repair work disconnect the Digimar M by pressing the ON/OFF
key.
•
Trained personnel instructed by Mahr may only perform work on the opened machine.
Protective caps may only be removed by trained personnel in the case of repair work. Any
unauthorized opening of the machine or unauthorized intervention cause the given
warranty to be invalidated and the manufacturer freed from liability.
•
Safety instructions and accident prevention regulations must be complied with. If required,
the safety expert of the client gives further instructions according to local conditions and in-
house guidelines.
•
Mounting and first putting into operation as well as maintenance and repair work may only
be performed by trained personnel.
•
Used batteries may be disposed of in an environment conscious way.
Instructions concerning measuring accuracy
•
Never tilt the Digimar M more than 90°.
•
Before any transport of the instrument lock the counter weight using the locking screw (see
chapter V.1).
•
Never lift the Digimar M by grasping the measuring carriage
•
Never use cleaning powder of cleaning agents which are harmful to plastics. Never let
liquids get inside the Digimar M.
•
Any setting modifications of the Digimar M – apart from the modifications described in the
present operating instructions are admissible.
Mahr GmbH ,
Digimar M 814
Publicité
Chapitres
Table des Matières
