Preparation Of The Compressor To Start Operation; Compressor Unpacking; Checkup - Prebena VITAS 45 Notice Originale

Preparation of the compressor to start operation

Preparation of the compressor to start operation

Compressor unpacking


Compressor unpacking is carried out by two workers.
Do not allow children to play with the packaging film, there is a danger of
suffocation.
 Do not allow children to play with the packaging film.
 Packing material keep out of children's reach.
Save the packing material.

Checkup

Risk of accidents by using faulty compressor.
 Check condition of the compressor before each use.
 Make sure that the compressor is in perfect condition.
 In particular check the following:

If the safety valve is faultless?

If the air filter is set on the cylinder head?

If the oil level is enough?

If the connection to power supply is in order?

Scratches on the casing are not a failure.
 Do not connect faulty compressor to the power supply.
 Before starting the operation of the compressor refer to employees of company PREBENA so they carry
out the repair.
Damaged pressure lines can be broken, it lead to injury.
 Before connecting check the compressor and pressure lines on damages.
ATTENTION!
Damaged pressure lines can be broken and the stream of compressed air-out can inflict property
damage.
 Before connecting check the compressor and pressure lines on damages.
10
WARNING
WARNING
CAUTION
 Place the box in front of you.

Open the top cover of the box.
 Hold tight the box by carrying holes (1).
 Carefully remove the compressor
from package (2) and place it in front of you.
 Remove all packaging material
from compressor.