After Operation - Prebena VITAS 45 Notice Originale

After operation

After operation
After operation or long break in operation proceed as follows.
To disconnect from compressed air supply proceed as follows:
 Switch off the compressor using the switch (1).
 Disconnect the compressor from power supply.
 Disconnect connected pressure hose from the quick-split coupling.
In case of opening of union nipple a freely suspended pressure hose can cause
severe or fatal injuries.
 Secure firmly pressure hose.
Proceed as follows:
 Press union nipple of pressure hose to the quick-split coupling
 Move the external O-ring of quick-split coupling backwards
Quick-split connection is unlocked.
 Remove pressure hose from the quick-split coupling.
In this case you will hear leftover compressed air in the edge device goes out.
 Drain the remaining compressed air from receiver through the drain valve.
14
DANGER