Loewe klang bar5 mr Guide De L'utilisateur page 17

Loewe klang bar5 mr

Remote control
2 Remote control
Sound Mute / Unmute.
Switches the soundbar on or
switches to standby mode.
Turns on/off the night mode.
Press and hold to turn the display
on / off (off by default). This feature
displays additional information on the
front panel display in certain situations.
Switches between surround
sound modes.
Press and hold to open the volume
setting for external speakers.
Press to change input source.
Press and hold in stand-
by mode to show the software
version on the display.
Equaliser - choose from pre-
set audio modes:
OFF, SPEECH, CLASSICAL, POP,
CUSTOM FILM, CUSTOM MUSIC.
Skip to the previous audio track in
USB / Bluetooth / PLAY-Fi mode.
Skip to the next audio track in USB
/ Bluetooth / PLAY-Fi mode.
Play/pause audio track in USB
/ Bluetooth / PLAY-Fi mode.
Press and hold for 8 seconds in stand-
by mode to restore the factory settings.
Press and hold to activate the
pairing function in the Bluetooth
mode or disconnect the exis-
ting paired Bluetooth device.
Reduce volume level.
Increase volume level.
Adjusts the treble level.
Adjusts the bass level.
First time use
The unit has a pre-installed lithium 2 x CR2032 batte-
ry. Remove the protective tab to activate the remote
control battery.
1. Press and slide the back cover to open the battery
compartment of the remote control.
2. Remove the protective tab.
3. Push the battery cover back into place.
Replacing the remote
control batteries
The remote control requires 2 pcs of CR2032, 3V Li-
thium battery. Press and slide the back cover to open
the battery compartment of the remote control.
1. Use a tool (such as the battery compartment
cover) to pry up the groove between the two
batteries to remove the old batteries.
2. Insert the new batteries from the side and push
them firmly into the original battery position.
Make sure the (+) side of the battery is facing up.
3. Push the battery cover back into place
16