List Of Safety Signs Used At The Machine - ENAR CRENA 22 Manuel D'instructions

2.8 LIST OF SAFETY SIGNS USED AT THE MACHINE

The mentioned types of machinery vibration plate CRENA 52, CRENA 52H, CRENA 63 y CRENA 63H, carry
a series of stickers and symbols complying with the european machinery directive.
Each sticker and symbol is accompanied by an explanatory text.
1 Combined
according to ČSN ISO 3864 (symbol No. B.2.5,
B.3.1 and NB.2.26), sign according to ČSN ISO
6405-1 (symbol No. 7.28) and informative
description.
Safety sign, symbol No. B.2.5 commands the
operator to wear ear protection all the time when
operating the machine.
Sign, symbol No. 7.28 commands the operator to
read the Operation Manual before attempting to
start work with the machine.
Safety sign, symbol No. NB.2.26 commands the
operator to wear protective gloves all the time
when working with the machine, in order to be
protected from effects of vibration. Warning safety
sign, symbol No. B.3.1 (exclamation mark) warns
the operator from other dangers.
Information for the operator how to proceed when
repairing, cleaning or adjusting the machine..
2
Sticker with sign No. 7.25 according to ČSN ISO
6405-1 (the symbol marks the suspension point,
i.e. the point where the machine can be fastened
for lifting).
3 Sticker with symbol No. 8.1 according to ČSN ISO
6405-1 (the sticker marks the location of bolt
closing the draining hole of engine oil)
4
Sticker containing information about the specified
fuel type.
5
Sticker containing instructions and information for
controlling the travel control lever.
6 Sticker containing symbols of a turtle and a
running rabbit as symbols for idle speed and
maximal
according to ČSN ISO 6405-1)
REVERSIBLE VIBRATORY PLATE COMPACTOR
stocker containing safety
(i.e. operational) engine
signs
speed,
CRENA 52*, 63*
en
9