Poker Connection To Flexible Shaft; Inspection; Dimensions Of Wear For Diameters And Lengths Of The Pokers - ENAR AVMU Manuel D'instructions

6.7 POKER CONNECTION TO FLEXIBLE SHAFT

The flexible shafts TAX are intended to connect the pokers: AX38, AX48 and AX58.
Allowing to interchange of a poker to other quickly and without a special tool. The model AX25, due to the
diameter need a special transmission. (TAXE).

6.8 INSPECTION

1.Before starting the job , check the correct working of all handling and safety devices
2.Inspect regularly the good condition of the feeding cables
3.Inspect regularly the good condition of the transmission. When the hose is broken, repair it or
replace it to avoid damaging the shaft or the poker.
4.When notice wear parts, replace it.
5.
of the equipment, notify immediately to proper responsible person.
7 DIMENSIONS OF WEAR FOR DIAMETERS AND LENGTHS OF
THE POKERS
MODEL
M35 AFP
M5 AFP
M6 AFP
M7 AFP
AVMU MOTOR - FLEXIBLE SHAFT AND POKERS
CONNECTION PROCEDURE:
1-Introduce the hexagonal driver of the poker in the shaft.
2-Screw the poker on the screwed end of the transmission up to fasten with the hand. ( left
threads).
If defects are found in the safety devices or other defects which could reduce the safe handling
DIAMETER
(mm)
AN 25 23,5 (25)
36 (38)
AN 38
45,5 (48)
AN 48
67,5 (70)
AN 70
AX 25 23,5 (25)
36 (38)
AX 38
45,5 (48)
AX 48
AX 58 55,5 (58)
PNU 25 23,5 (25)
38 (40)
PNU 40
PNU 50 47,5 (50)
57,5 (60)
PNU 60
PNU 80 77,5 (80)
97,5 (100)
IN 100
34,5 (36)
48 (50)
56 (58)
64 (66)
TAX1m, TAX1-5m, TAX2m, TAX3m, TAX4m, TAX5m
MINIMUM SECTION ACCORDING VDE RULES
Line
mm²
1
1,5
2,5
4
6
10
16
25
LENGHT
(mm)
325 (330)
351 (356)
424 (429)
510 (518)
310 (220)
330 (335)
355 (360)
360 (365)
215 (220)
295 (300)
295 (300)
295 (300)
340 (345)
425 (430)
345 (350)
370 (375)
425 (430)
395 (400)
AVMU - AX25, AX38, AX48, AX58
Maximum Max fuse
A A
15 10
18 10 / 3 – 16 / 1 –
26 20
34 25
44 35
61 50
82 63
108 80
en
7