Maintenance - ENAR CRENA 22 Manuel D'instructions

2. Push red button (1) for 2-3 seconds to shut-off the engine.
3. If the machine is equipped electric start turn the key in the ignition (1) to the off position.
7

MAINTENANCE

1. Lift the tipping-off cover when the machine is in horizontal position only!
2. See enclosed Engine Maintenance Manual for engine maintenance instructions.
3. Tensioning of the vibrator drive belt:
The drive belt can be tensioned (see maintenance schedule, point 7).
4. Checking bolted connections:
We recommend checking bolted connections before every starting of the machine.
5. Adjustment of the engine speed:
In case of engine repair or replacement, engine speed has to be adjusted (see maintenance schedule,
point - Vibrator).
NEVER ADJUST ENGINE SPEED ABOVE THE SPECIFIED LIMIT!
Should engine speed be exceeded above the specified limit, damage to the machine may occur due
to excessive vibrations.
The manufacturer will not honour any warranty claims coming from this reason!
WITHIN WARRANTY PERIOD, HAVE SUCH ADJUSTMENT TO BE DONE BY AUTHORIZED SERVICE
ONLY!
REVERSIBLE VIBRATORY PLATE COMPACTOR
CRENA 22*, 26*, 32*
en
25