Amibot Flex Laser Manuel D'utilisation page 33

Troubleshooting
No. Problem
The robot does
01 not charge any
more.
Home base
02
failed.
The robot has
03
frozen.
Cause
1. The robot is not
correctly positioned
on the home base or
it is not plugged in
correctly.
2. The robot is
switched on.
3. Dust on the sensors
1. The home base's
position is incorrect.
1. The robot is stuck in
the cables.
31
Solution
1. Correctly reposition
the robot and place its
power sensors on the
home base sensors.
2. Switch the robot on by
pressing the ON/OFF
not
power button.
3. Clean the sensors with a
soft cloth.
1. Plug the home base in,
position the home base
between several rooms,
remove any obstacles
within a radius of 1
metre to the left and
right and 2 metres in
front of the home base.
1. Remove the cables
and any possible
obstacles for a better
performance.
EN