Insert The Sim Card - TomTom LINK 300 Guide D'installation

For the transmission process
The following instructions apply for the LINK 300
only. The LINK 310 already comes with a built-in SIM
card.
To prepare the LINK 300 for data exchange
with TomTom WEBFLEET you need to insert
the SIM Card in the unit.
1. Press the release button for the SIM Card
holder with a pointed object until it
releases.
2. Pull out the SIM card holder.
3. Gently press the SIM card into the SIM card
holder until it clicks into place.
4. Hold the SIM card holder with the SIM card
facing down, then insert the holder into
LINK 300 as shown in the figure.

Insert the SIM Card

Insert the SIM
Card
11
EN