Cleaning And Storage; Troubleshooting - MAXXMEE TS-20143 Mode D'emploi

EN

CLEANING AND STORAGE

Please Note!
■
Do not use any sharp or abrasive cleaning agents or
cleaning pads to clean the device. These may damage the
surfaces.
• Make sure that the device is not connected to the mains
power and has cooled down suffi ciently.
• Dust down the device and the base (6) if necessary or wipe
them down with a damp cloth if you need to. Then wipe
them with a dry cloth.
• Store the device in a clean, dry place so that it is protected
and is out of the reach of children and animals when it is
not in use.

TROUBLESHOOTING

If the device does not work properly, check whether you are
able to rectify the problem yourself. If the problem cannot
be solved with the steps below, contact the customer service
department.
Do not attempt to repair an electrical device
yourself!
The device does not work.
The mains plug is not inserted in the plug socket correctly.
► Correct the fit of the mains plug.
The extension cable is not connected to the device correctly.
► Correct the fit.
26