MAXXMEE TS-20143 Mode D'emploi page 24

EN
3. Use the buttons + increase temperature (9) / – decrease
temperature (13) to set the temperature you want (15 –
32 °C). The selected temperature has been set when the
number on the display stops fl ashing.
4. Use the Speed button (12) to set the speed of the fan
heater:
HH – high speed
LL – low speed
 
The device automatically stops heating as soon as the
set temperature has been reached in the room.
If the room cools down again, it automatically starts
the heating process again while it is switched on.
5. To switch off the device, move the On / Off switch to the
0 position.
6. Allow the device to cool down and pull the plug out of the
plug socket.
Setting the Timer
Thanks to the timer function, a required operating time can be
set at between 1 – 12 hours, after which the device automati-
cally switches off.
1. Switch on the device (see the "Use" chapter).
2. Press the Timer button (11). 0 fl ashes on the display (10).
Use the buttons + increase operating time (9) / – decrease
operating time (13) to set the operating time you want.
The selected operating time has been set when the num-
ber on the display stops fl ashing.
3. Select the temperature and speed of the fan heater
(see "Use"). After that the display switches between the
set operating time and the temperature.
24