Roco and Fleischmann Z21 Manuel D'utilisation page 57

CV Description
#42 Signal-ID for signal 2, see CV #41
#43 Signal-ID for signal 3, see CV #41
#44 Signal-ID for signal 4, see CV #41
#45 Initialisation signal 1
Determines the signal aspect which should be displayed when the decoder is switched on.
255 = Restore last signal aspect
Displays the signal aspect again which was presented before the decoder was switched
off.
0 = Display standard signal aspect
Displays the default signal aspect of the signal (safe condition "Stop").
1, 2, 3 ... 24 = Explicit specification
Displays the first, second, third etc. signal aspect. Invalid values lead to specification 0
(standard signal aspect).
You can find more information on the available signal aspects in
figuration "Universal"
Factory setting: Restore last signal aspect.
#46 Initialisation signal 2, see CV #45
#47 Initialisation signal 3, see CV #45
#48 Initialisation signal 4, see CV #45
#61 Current DCC value from signal 1
ext
This is the DCCext value which corresponds with the signal aspect currently being display-
ed. This CV is not a "configuration", but rather a live value which for example can be used
for tests during commissioning. This variable can also be written, whereby invalid values
are ignored.
You can find the valid DCCext value range in
sal" or under the link provided in
#62 Current DCCext value of signal 2, see CV #61
#63 Current DCCext value of signal 3, see CV #61
#64 Current DCCext value of signal 4, see CV #61
#65 Current number of the signal aspect from signal 1
This is the number of the signal aspect currently being displayed. This CV is not a "con-
figuration", but rather, similar to CV #61, a live value which for example can be used for
tests during commissioning. This variable can also be written, whereby invalid values are
ignored.
You can find more information on the signal aspects in
"Universal" or under the link provided in
#66 Current number of the signal aspect from signal 2, see CV #65
#67 Current number of the signal aspect from signal 3, see CV #65
#68 Current number of the signal aspect from signal 4, see CV #65
or under the link provided in Appendix B – Signal
Appendix A – Signal configuration "Univer-
Appendix B – Signal
Appendix B – Signal
Appendix A – Signal con-
configurations.
configurations.
Appendix A – Signal configuration
configurations.
Range Default
0 - 255 71
0 - 255 71
0 - 255 71
0 - 255 255
0 - 255 255
0 - 255 255
0 - 255 255
0 - 255 -
0 - 255 -
0 - 255 -
1 - 24 -
1 - 24 -
1 - 24 -
1 - 24 -
Z21 ist eine Innovation von FLEISCHMANN und ROCO
57