Table des Matières
Publicité
INSTALLATION C: WALL MOUNTED (OPTIONAL)
(Requirements for wall mounted installation: 2 pcs expansion screws M10*60mm
(NOT Included in the packaging))
① Before starting the installation, ensure the 4 bottom screws are tightened.
② Drill 2 holes of φ14mm with a depth of 60mm and holes distance 104mm on the wall.
③ Use 2 expansion screws to fix the lamp on the wall.
④ To adjust the angle of the lamp, loosen the screws from both sides of lamp (as
shown in the above image) and adjust the lamp angle, adjustable by upwards 20° and
downwards 10°. Then tighten the screws of the lamp.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
LED SOLAR STREETLIGHT
EN
1
3
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Φ14MM
Depth
60MM
2
20°
10°
Loosen the screws
here to adjust angles.
4
Publicité
Table des Matières
