Table des Matières
Publicité
INSTALLATION A: STRAIGHT POLE
(Default installation method, accessories included)
① Before starting the installation, ensure the 4 bottom screws are tightened.
② Remove the gaskets of small U-shaped brackets, then insert them to lamp bracket
across the straight pole.
③ Tighten the screws to fix lamp onto the pole (Suitable for poles with Φ50-60mm).
④ To adjust the angle of the lamp, loosen the screws from both sides of lamp (as shown
in the above image)
and adjust the lamp angle, adjustable by upwards 20° and downwards 10°. Then tighten
the screws of the lamp.
LED SOLAR STREETLIGHT
EN
1
3
2
20°
10°
Loosen the screws
here to adjust angles.
4
Publicité
Table des Matières
