Routine Control And Maintenance Operations And Safety Checks - RCM 38.00.89 MONO BOXER D Notice D'utilisation Et Entretien

ROUTINE CONTROL AND MAINTENANCE
OPERATIONS AND SAFETY CHECKS
1) The motor sweeper must be inspected by a specialist technician who checks its safety or for any damage
or defects in the following cases:
- before it is put into operation
- after modifi cations or repairs
- at regular intervals, as indicated in the «Maintenance program" table.
2) Every six months check that the safety devices are in good working conditions; the inspection must be
made by authorized specialist staff.
To ensure that the safety devices are properly operating , the machine must be overhauled by authorized
staff or skilled workshop every 5 years.
3) The person in responsable of the machine must make an annual check of its condition. During this che-
cking, he must decide whether the motor sweeper still complies with the technical safety regulations. After
checking it has to apply on the machine a label of checking made.
MAINTENANCE PROGRAM
CHECK ENGINE OIL LEVEL
CHECK ENGINE AIR FILTER
CHECK ENGINE COOLING WATER LEVEL
1
REPLACE ENGINE OIL ST TIME
REPLACE ENGINE OIL
1
REPLACE ENGINE OIL FILTER ST TIME
REPLACE ENGINE OIL FILTER
CHECK HYDRAULIC OIL COOLER
CHECK BATTERY WATER LEVEL
CHECK STATUS OF CLEANING THE ENGINE COOLER FINS
REPLACE HYDRAULIC OIL FILTER CARTRIDGE
/
CHECK AND OR CLEAN FUEL FILTER
REPLACE FUEL FILTER
CHECK HYDRAULIC OIL LEVEL
REPLACE HYDRAULIC OIL
C
HECK THAT THE MAIN BRUSH DOES NOT HAVE STRING
CHECK DUST FILTERS
GREASE THE STEERING SYSTEM CHAIN AND CHECK ITS TENSION
REPLACE DUST FILTERS
(L) = LOMBARDINI engine
(H) = HONDA engine
(K) = KUBOTA engine
(Y) = YANMAR engine
(X) = all versions DIESEL and PETROL
(•) = all versions
8 - 10 20
( )
X
( )
X
( )
X
H
(•)
(L)
(K)
, , . . (•)
WIRE ETC ETANGLED IN IT
EVERY HOURS
40 50 100 125 200
(Y)
(K)
(H)
(L) (Y)
(K)
(K)
(H)
(K)
( )
X
(H)
(Y)
(K)
(•)
(•)
ENGLISH
....
250 300 400 500
(L)
(•)
(H)
(L) (Y)
(K)
1500
(•)
(•)
(•)
57