Technical Data; Emissions; Noise Emission Specifications; Scope Of Supply - Mafell LS 103 Ec Traduction De La Notice D'emploi Originale

2.3 Technical data

Universal motor, radio and TV interference suppressed
Input power continuous operation
Current at nominal load
Idling speed
Mortising depth
Mortising depth with guide support stand FG 150, order No. 200
980
Weight without mains cable LS 103 Ec
Weight guide support stand FG 150, order No. 200 980

2.4 Emissions

The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be
used for comparing the tool with another and also in a preliminary assessment of exposure.
2.4.1

Noise emission specifications

Noise emission values determined according to EN 62841:
Idling
Machining
2.4.2 Vibration specifications
The typical hand-arm vibration is 5.1 m/s

2.5 Scope of supply

Single-phase chain mortiser LS 103 Ec complete with:
1 guide rail, cpl.
1 mortising chain
1 chain wheel
1 crossfeed stop
2 operating tools
1 operating manual
1 folder "Safety Instructions"

2.6 Use according to intended purpose

The single-phase chain mortiser is exclusively
intended for mortising solid wood using mortising
chains. The dimensions of the mortising chain sets
used (guide rail, mortising chain and chain wheel)
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
Sound power level
108 dB (A)
108 dB (A)
.
2
Workplace-related emission value
97 dB (A)
97 dB (A)
must correspond to the mortising chain sets listed in
the operating instructions.
-15-
230 V~, 50 Hz 120 V~, 60 Hz
2500 W
13 A 20 A
4050 rpm
100 mm (3 15/16 in.)
150 mm (5 7/8 in.)
8,7 kg (19.18 lbs)
4.6 kg (10.1 lbs)