Technical Data; Emissions; Scope Of Supply - Mafell MHU 82 Traduction De La Notice D'emploi Originale

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power – input, continuous operation
Cutter head speed
Planing width
Cutting depth
Maximum rabbet depth
Cutting speed – nominal load
Diameter of hose connector
Dimensions of base plate
Weight without mains cable

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other sources of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement is recorded using the planing shaft included in the standard equipment.
2.4.2 Vibration specifications
The typical hand-arm vibration is 2.5 m/s

2.5 Scope of supply

Portable electric plane MHU 82 complete with:
1 pair of TCT knives
1 rabbet depth stop
1 service tool
1 carrying case – according to type-specific machine execution
1 operating manual
1 folder "Safety Instructions"
no load
nominal load
L = 84 dB (A)
PA
K = 1,5 dB (A)
PA
L = 95 dB (A)
PA
K = 1,5 dB (A)
PA
.
2
-14-
230 V~,
50 Hz
800 W
12000 rpm
7800 rpm
82 mm (3 15/64 in.)
0 – 3 mm (0 – 1/8 in.)
22 mm (55/64 in.)
24 m/s (78.7 ft/sec)
35 mm (1 3/8 in.)
82 x 280 mm (3 15/64 x 11 1/32 in.)
3,6 kg (7.9 lbs.)
110 V~,
50 Hz
800 W