Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell DD40G Traduction De La Notice D'emploi Originale

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Drill clearance
Drilling depth
Swivel range
Tool diameter maximum
Tool diameter minimum
Tool receiving bore
Tool idling speed
Hose connector diameter
Weight without mains cable
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1:
Idling
The noise measurement was recorded using the tool included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

DD40G MidiMAX
Item No. 916001, 916020, 916021, 916025
2 carbide-tipped dowel drill bits ø 8 mm (5/16 in.)
1 pack of MAFELL special dowels ø 8x30 mm (5/16 x
1 3/16 in.)
(approx. 200 pcs.)
1 bottle of glue
2 anti-slip mats
1 Allen key with handle
1 service tool in bracket on the machine
1 carrying case
DD40P
230 V~, 50 Hz or 110 V~, 50
Hz
1000 W
4,3 A (230 V) or 9,1 A (110 V)
32 mm (1 1/4 in.)
0 - 40 mm (0 - 1 9/16 in.)
0 - 90°
16 mm (5/8 in.)
6 mm (15/64 in.)
8 mm (5/16 in.)
13500 rpm
35 mm (1 3/8 in.)
2,8 kg
130 x 300 x 185 mm (5 1/8 x
11 13/16 x 7 1/4 in.)
Sound power level
100 dB (A)
.
2
Workplace-related emission value
89 dB (A)
1 operating manual
1 folder "Safety Instructions"
DD40G MaxiMAX
Item No. 916002, 916030, 916031, 916032, 916033,
916034, 916035
2 carbide-tipped dowel drill bits ø 6 mm (1/4 in.)
2 carbide-tipped dowel drill bits ø 8 mm (5/16 in.)
2 carbide-tipped dowel drill bits ø 10 mm (3/8 in.)
1 pack of MAFELL special dowels ø 6x30 mm (1/4 x
1 3/16 in.)
(approx. 350 pcs.)
-15-
DD40G
230 V~, 50 Hz or 110 V~, 50
Hz
700 W
3,0 A (230 V) or 6,4 A (110 V)
32 mm (1 1/4 in.)
0 - 37 mm (0- 17/16 in.)
0 - 90°
12 mm (15/32 in.)
3 mm (1/8 in.)
8 mm (5/16 in.)
18500 rpm
35 mm (1 3/8 in.)
2.8 kg (6.2 lbs)
130 x 300 x 185 mm (5 1/8 x
11 13/16 x 7 1/4 in.)