Apex Pro-care Optima Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 90
Pro-care Optima / English
5.4 Evacuation Handles
5.5 Transportation
5.6 Notifications of parts replacement
When service message of battery/filter replacement (Code no. 22/23) shows up on the LCD screen,
the device requires battery/filter replacement service. Please contact local representative or place
of purchase for further support.
NOTE- To skip the message, please press the knob and confirm.
NOTE- Service message of battery/filter replacement which will only show up at the time the
device is turned on.
NOTE- When an emergency occurs, the
designated handles can be used for
caregivers to quickly and safely evacuate
the patient from the bed in the facility.
NOTE- When there is a need of patient
transportation, pump with the power cord
can be disconnected from the mattress
during transport. For optimum comfort, APEX
recommends
caregivers
Continuous Low Pressure mode and wait for
5 minutes before disconnecting. Cap on the
quick connector as shown on the left to
keep the air inside the mattress. The
mattress remains inflated at least 24 hours
depending on the setting. Optional battery
model(9P-086520) can support at least 6
hours of treatment mode.
to
change
to
19

Publicité

Table des Matières
loading

Produits Connexes pour Apex Pro-care Optima

Ce manuel est également adapté pour:

Pro-care optima prone

Table des Matières