Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1�2

Getting started

1�2�1 Set up
Inserting or removing the SIM/microSD card
You must insert your SIM card to make phone calls. You do not need
to power off your phone before inserting or removing the SIM card as
this phone supports hot swap.
Your phone only supports nano-SIM cards. Do not attempt to
insert other SIM types like mini and micro cards; otherwise, this
may cause damage to your phone.
Charging the battery
You are advised to fully charge the battery (
indicated by a percentage displayed on the screen while the phone is
powered off. The percentage increases as the phone is charged.
To reduce power consumption and energy waste when the
battery is fully charged, disconnect your charger from the
plug; switch off Wi-Fi, GPS, Bluetooth or background-running
applications when not in use; reduce the backlight time, etc.
1�2�2 Power on your phone
Hold down the Power key until the phone powers on, unlock your
phone (Swipe, PIN, Password or Pattern) if necessary and confirm. The
Home screen is displayed.
If you do not know your PIN code or forget it, contact your network
carrier. Be sure to keep your PIN code somewhere safe.
19
). Charging status is

Publicité

Table des Matières
loading

Table des Matières