Preparations At The Mounting Plate; Drill Bore Holes - Lenze E93ZWL Instructions De Montage

Show/Hide Bookmarks
Installation of the E93ZWL air lock

Preparations at the mounting plate

3.2 Preparations at the mounting plate
3.2.1

Drill bore holes

b1
a4
Top of control cabinet
Mounting plate
a1
[mm]
450
Working clearance a4
Left/right to another controller with air lock
Left/right to another controller without air lock
Mark the bore holes on the mounting plate according to the figure.
Drill the holes into the mounting plate.
4
Note!
You can use a template for easy marking of the bore holes and the recess at the top
of the control cabinet. This template can be found in the Internet as dxf-file under
"Download" at
http://www.Lenze.de
a1
a2
0
a3
1
b
d
a2
a1
a2 a3
[mm] [mm]
340 225
E93ZWLX DE/EN/FR 1.0
a4 b
[mm] [mm]
200 1005
Minimum clearance
200 mm
30 mm
93ZWL012
b1 d
[mm] [mm]
70 9 (12x)
l